USA Standard Wireing Management Office System Approved
Somsavat Lengsavad is originally from Hainan， China. He felt deeply love of Hometown and strongly supported the Chinese “the Belt and Road strategy of China trade.” Our company’s chairman Wang and general manager received Somsavat Lengsavad in person. They expected that the vice-premier of Laos will allow us to sell our best products of Laos.
Office Workstation/Partition/Executive Manager Desk/ Office Cubicle/Melamine Desk/Reception Venner Desk/ Mesh Office Chair/Executive Conference chair/office sofa Public Furniture/Airport Chair/Cinema Chair/Court Furniture/School furniture/Auditorium Chair/Hotel Furniture/ Veneer Credenza/Filing Cabinet/Business Space /Call Center Cubicles
“Hongye Shengda”Brand a leading Chinese manufacturer of Office furniture, today announced that the Company has been honored with the Guangdong Famous Trademark Certificate by the Guangdong Provincial Admintration for Industry and Commerce.
There is no best, only better! Thank you for all customer support!Commercial Furniture Project Customized Top supplier;Office Hotel Auditorium Theater Government Public China Furniture Manufacturer , One Stop Solution For Commercial Space ..
We hereby certify that the US dollar bank account information is as follows:
Beneficiary: OT-HONGYE SHENGDA FURNITURE CO., LTD
Bank address: 1 GARDEN ROAD, HONG KONG
Account number: 0120177856941
Beneficiary Bank Code: BKCHHKHH
SWIFT CODE: BKCHHKHH
Our company to Statement that the account number is correct, if the money to the other unauthorized account of bank, we will be not be assume responsibility towards or accept liability for the order of Buyer.
Guangdong Hongye Shengda Furniture Co., Ltd.2017-08-21
However, all too many chairs have fixed arms and they are rarely a good idea. In fact you’re probably better using a chair with no arms than one with fixed arms.
Why is this?
The drawback of fixed arms
As indicated by the name fixed arms don’t adjust. No matter where you would like them to be they’re always going to be in the same place. Unfortunately more often than not they set your lower arms in an unnatural position. And that’s not all, they also push your shoulders and neck into an unhealthy posture too.
You might just get lucky and find they are alright for you.
That’s rare though. What’s needed is something with a bit more flexibility.
Simple height adjustable arms
This sort of arm allows users to move the arms up and down vertically.
They are very easy to adjust normally it’s just a case of pressing a button to move them up and down. So straight away you are able to rest your lower arms in a comfortable position.
However it’s just as important to make sure your shoulders are correctly supported. They should be placed in a relaxed posture and not hunched up in the air.
Some arms have an option for padded tops and this is always worth going for. Hard arm tops can soon cause lower arm discomfort even when your arms are correctly supported.
What other refinements can you get with adjustable arms?
Highly adjustable arms
Whilst simple height adjustable arms will answer most people’s needs there are some useful refinements worth considering on more sophisticated arms.
Here are some of the possibilities.
You can get arms which allow you to angle the actual arm tops inwards and outwards. This can be useful for people with narrow shoulders as it sets the arm supports closer together. As well as this some slide forwards and backwards which can also be handy for fine tuning your arm support.
A number of chairs let you alter the width between the chair’s arms. Mostly this is done when assembling the chair, although a few can be easily adjusted at any time. The good thing about width adjustment is it means you can set the arms up to better suit your shoulder width. Once adjusted you arms sit vertically aligned with your shoulders so you aren’t straining them at odd angles.
It’s also possible to find arms that push out of the way when you don’t need them.
This can be handy when you want to work close in at your desk. Different chairs handle this in different ways. Humanscale’s Freedom chair lets you rapidly drop the arms to seat level. On HÅG’s H05 chair the arms swing back around the back of the chair. And Neutral Posture chairs let you swing the arms down towards the underside of the chair.
Let’s recap on what matters on chair arms
- Fixed arms are bad, they rarely support your arms and shoulders properly
- Simple height adjustable arms are fine for most people
- Choose padded arm tops if available
- Highly adjustable arms can add some useful extra features
Typically backs are offered in low, medium or high versions. If you going for a low or medium size back then you want to make sure it’s height adjustable so it can give you proper support.
The most important thing is to ensure your lower back gets good support. Although some high backs are also height adjustable it’s less important, provided it offers good lumbar support.
Let’s look at how backs adjust.
How adjustable height chair backs work
Chair backs adjust in a number of different ways. A popular method is the ratchet back which is very simple to set up. Built into the back support is a ratchet mechanism. To move it up you would normally grip the back on each side at its base and push it up gently. As you do so you will find the back clicks a little higher to a number of preset positions. So once you find the one that works for you that’s it.
And in case you need to start out again if you lift the back up to its maximum height it usually drops back down to the lowest position so you can start over if necessary.
Sometimes there may be a couple of buttons to press in while you adjust the back. As soon as you reach the desired height just release them to lock in your preferred height.
Some chairs use a locking knob. You would undo it to let you move the back and then tighten it again to save the height setting.
So much for adjustable backs what if it’s fixed?
Is it OK to use a fixed height back?
In the right situation a fixed back is fine. It needs to be a full height back so it covers up to your shoulders or beyond. Ideally it should include some sort of lumbar support which needs to be adjustable. That way you can fine tune it for your lower back.
Some chairs have exposed lumbar supports while yet others are built into the chair back itself.
Some of the more sophisticated chairs these days like Humanscale’s Liberty and Diffrient World chairs have a 3 ply mesh specifically designed to give your back support where it’s most needed.
Others like Herman Miller’s Sayl chair uses a cleverly designed open plastic material. This is reinforced in the areas where most support is needed making sure you gain proper comfort.
In the case of Steelcase’s Think chair it has an open weave fabric behind which are a series of lateral wire supports designed to take up the shape of the user’s back.
All of these innovative back designs have the added advantage of providing excellent air circulation, which is a great help for sweaty backs in summer.
Here are the key points we covered
- Low and medium height backs should be height adjustable
- Backs usually adjust via ratchets, buttons or locking knobs
- The most important thing is to get good lumbar support
- It’s OK for backs to be fixed provided they are designed to support you properly
- Some modern chairs use specialist mesh or plastics to support you correctly
Often a chair will have an unusual feature that the user takes an instant dislike to, sometimes it’s justified, other times it’s not.
A good example of this is the Aeron pellicle upholstery, which probably gets more bad comments than anything I’ve seen. Nonetheless, it also gets a lot of praise, so it really is down to personal preference.
So, if you are considering buying a particular model of chair and come across a negative comment, don’t let that one comment put you off. Look around for other opinions, ask questions in forums, check reviews on epinions.com and try and get a more balanced opinion.
You need to make a number of decisions on how and where you wish to receive your guests and visitors.
You also need to decide whether you will receive different visitors in different ways. For example, you may well decide that everyday sales people visiting the office will be greeted and seated in a different way to a senior manager or director of one of your best clients.
Once you have decided how you wish to receive your guests, you next need to make your mind up how you want to seat them.Office Workstation/Partition/Executive Manager Desk/ Office Cubicle/Melamine Desk/Reception Venner Desk/ Mesh Office Chair/Executive Conference chair/office sofa Public Furniture/Airport Chair/Cinema Chair/Court Furniture/School furniture/Auditorium Chair/Hotel Furniture/ Veneer Credenza/Filing Cabinet/Business Space /Call Center Cubicles
Leg pain for office workers may not be as big a problem as neck and back pain, nonetheless it still affects a lot of people and when you understand the potential causes it can often be resolved.
Typically people complain of pain to the underside and tops of their thighs. Or their legs suffer some numbness and feel heavy and dead.
A lot of the time the height of the seat can be the cause. For many it will simply be a case of adjusting their working height and yet for certain others it isn’t so simple.Office Workstation/Partition/Executive Manager Desk/ Office Cubicle/Melamine Desk/Reception Venner Desk/ Mesh Office Chair/Executive Conference chair/office sofa Public Furniture/Airport Chair/Cinema Chair/Court Furniture/School furniture/Auditorium Chair/Hotel Furniture/ Veneer Credenza/Filing Cabinet/Business Space /Call Center Cubicles
For a start they are likely to have top quality foams which bounce back to shape even after years of use. And in the case of a chair like Herman Miller’s Embodythe 4 ply support suspension makes it feel like you are floating rather than sitting.
A lot of chairs have automatic adjusting recline functions, so as you lean back the chair senses your weight and where you are applying pressure and automatically compensates giving proper back support. A good example of this is HÅG’s Futu chairwhich even includes some fine tuning if required, however most will find the standard auto adjuster fine.
Adjustable arms can help make the work experience much more enjoyable, especially the more flexible ones which don’t just alter in height. They also adjust in width, angle and front to back as well, making it easy to get perfect arm comfort.